{QTtext}{font:Arial}{plain}{doNotAutoScale:on}{anti-
alias:on}{size:14}{textColor: 65535, 65535, 65535}{backColor: 0, 0,
0}{justify:center}{width:800}{height:30}{timeStamps:absolute}
{language:0}{textEncoding:0}
[00:00:00.0]
Take your Inspector out.
[00:00:03.0]
And make sure you choose graphic in the Inspector, and we have a new slide,
[00:00:09.0]
and we are using our pet show slide show, and we're going to make a rectangle.
[00:00:13.0]
Here's our rectangle.
[00:00:14.0]
We can choose a gradient, and we can click the color well
[00:00:23.0]
and choose some colored crayons, or we can use the RGB sliders.
[00:00:30.0]
And we could control the angle of our gradient, as well as flip flopping the gradient.
[00:00:35.0]
And we can control the strokes.
[00:00:38.0]
We can increase the thickness in pixels.
[00:00:41.0]
We can click the shadow and have a shadow, and we will use the RGB sliders to make more of a red shadow.
[00:00:50.0]
If we click the magnifying glass, we can sample a color from what we have already, and we can control the opacity.
[00:01:03.0]
If, we hold down the Alt key, you can Alt drag copy.
[00:01:10.0]
Now, we'll choose the line.
[00:01:12.0]
We're going to go ahead and position our line and connect the 2 rectangles.
[00:01:21.0]
Go ahead and connect the corners, the top left corners of our rectangle and we can increase the thickness.
[00:01:29.0]
Now, we could select this line, and if you hold down Alt, it'll make a copy of course.
[00:01:40.0]
But, if you want to constrain the line to a straight line, hold down Alt and Shift and drag.
[00:01:49.0]
And Shift will keep it in a straight line.
[00:01:51.0]
It'll be moving in a straight direction, and you can repeat the process.
[00:01:56.0]
Alt and then click Shift right away.
[00:02:00.0]
Alt first, then Shift about 2 seconds later and that will keep it in a straight direction.
[00:02:08.0]
You could add a shadow to each line, just by checking off shadow for that particular object.
[00:02:14.0]
Now, we can marquee all our shapes, and we can change our fill, and we can drag and drop the color on our shapes.
[00:02:27.0]
Here, we drag and drop, and we could control the stroke thickness or the line style - and get some fancy results.
[00:02:45.0]
And there's your gradient, and that's pretty much it.
[00:02:49.0]
[00:02:51.0]
and that's pretty much it.
[00:02:49.0]
[00:02:51.0]